M Mode: Under the M( Manual setting) mode,you can set the flash index as you like.
TTL Mode: Set the shooting mode as M,AV,TV, the speedlite will flash automatically via the lens of the camera.
S1/S2 Mode: Used as off-camera auxiliary to creat various lighting effects. The S1 mode is suitable for manual flash environment, the S2 mode is suitable for TTL flash environment.Under these two modes, the adjustment of the output brightness of the speedlite is as the M mode.
Stroboflash Mode: Stroboflash is a kind of motion that can analyse the subject. Under the stroboflash mode,the flash can photo a series of moving subjects for many photos. You can set the flash rate.( the flash times one second, use HZ to represent it), flash times and flash input.
Manul setting the flash head zoom position: You can adjust the zoom position of the flash head whenever which mode the speedlite is. The default focal length of the speedlite is 50MM. Press the ZOOM button, the “zoom 50mm” is twinkle, then you can adjust when press the “ZOOM” button, It will be saved when you press zoom button again.
Test Flash: Shether in any mode, you can press PILOT button to test if the flash ligth flashed normally.
Power save mode: If 30s have any operation,It can be wake up through any button
Overheating proteciton: If the flash light is used too frequently,its overheating protection funciton will be triggered, the red and green lights of the charging indicator will blink alternatively, and the flash light will be locked. in such case, wait indicator to be green then cancel the protection before continuing the use.
* Please try to use the 1/4 output or lower when rapid shooting is needed to prevent the effect on the shooting.
Insulated Gate Bipolar Transistor(IGBT)
42meters (ISO 100,105mm)
Power supply(No including)
4XAA size batteries(Alkaline or Ni-MH are usable)
Approx. 4s(use AA alkaline battery)
Wireless trigger sensor
Wireless triggering disstance: 20–30m indoor,10–15m outdoor
Please keep in mind the following tips:
the wireless triggering window needs to face the master flash and the direct sunlight shall be avoided.
Hot shoe pin
Compatible with Canon EOS Cameras 5D III 6D 60D 450D 500D 550D 600D 650D 700D T6 T3i and other Canon DSLR cameras with standard hot shoe mount.
Vertical rotation angle: 0-90 degrees
Horizontal rotation angle: 0-270 degrees
Pull out the wide-angle diffusion board, push back the reflection board and arrange them as per the figure; the flash effect will be softer and more natural.
Color Temperature: 5600k
Flash control: 8 levels of output control(1/128–1/1)
Net weight: 252g
Guide Number:42(ISO100 ,105mm)
Additional features: FEC, AEB, Auto zoom, Manual zoom
Suitable for Canon 5D Marrk III 6D 60D 450D 500D 550D 600D 650D 700D T6 T3i and other Canon DSLR Cameras
With wireless trigger and TTL functions and perfect suitable for beginners.
With the stable mount and recycles fast